﻿id>>description>>translation
author>>Language pack author>>宋立    www.1001bit.cn
title>>Create Joists/Battens>>创建椽条
t1>>Rafter width>>椽条宽
t2>>Rafter depth>>椽条长
t3>>Rafter spacing>>椽条间距
t5>>Setting out>>设置
t6>>from outer ends>>从外边沿
t7>>from center of face>>从面中心
t8>>from pick point>>从拾取点
t9>>type of joists>>椽条类型
setup_profile>>Setup profile>>设置截面
clear_profile>>Clear profile>>清除截面
do_joists>>Create joists>>创建椽条
exit_joists>>Exit>>退出
gst1>>Please pick on a face to define as profile>>请拾取面以定义截面
gst2>>Error! Profile must be drawn on xy plane>>截面必须在XY平面上
st1>>Please pick a face>>请拾取面
st2>>Please pick a point>>请拾取点
st3>>Please pick direction of joists>>Please 请拾取椽条方向
er1>>Invalid selection. Please pick a face>>请选择面
pr1>>Please enter description for current setting>>描述名称
preset_save>>Save settings>>保存设置
preset_delete>>Remove settings>>移除设置
dw>>dialog width>>520
dh>>dialog height>>610
end>>end>>end




