﻿id>>description>>translation
author>>Language pack author>>宋立    www.1001bit.cn
title>>Create Vertical Wall>>创建垂直墙体
t1>>Wall alignment>>对齐方式
t2>>Center>>中
t3>>Right>>右
t4>>Left>>左
t5>>Wall Thickness>>墙厚
t6>>Wall Height>>墙高
t7>>Build wall as group>>成组
setup_profile>>Setup Profile>>设置截面
clear_profile>>Clear Profile>>清除截面
do_wall>>Create Wall>>创建墙体
exit_wall>>Exit>>退出
st1>>Please pick on a face to define as wall profile>>请拾取一个面以定义墙体截面
st2>>Please pick reference point of wall profile>>请拾取墙体截面参考点
st3>>Pick points to create wall. Double click left button when done.>>拾取点以定义墙体路径，右击或双击完成
st4>>Please pick start point>>拾取开始点
er1>>Profile must be flat on x y plane>>截面必须在XY平面上
er2>>error-please select a face to define profile>>请拾取面以定义截面
pr1>>Please enter description for current setting>>描述名称
preset_save>>Save settings>>保存设置
preset_delete>>Remove settings>>移除设置
dw>>dialog width>>500
dh>>dialog height>>600
end>>end>>end




